Initial Setup 

Follow

Introduction 

Pax E600 is an all-in-one terminal which transforms the shopping experience by allowing customers purchase over the counter, in close interaction with retail staff. The hand held E600 features a large yet compact display, fast printer and payment acceptance module allowing any type of transaction to be conducted while on the move. 

Specifications

   

OS

Android 7.1

Processor

Quad-core Cortex® -AS3 11.4 GHz

Memory

1 GB DOR + 8 GB eMMC

Display

8-inch All Perspective IPS Display I 800 x 1280 Pixels HD Display Capacitive Touchscreen

Physical Keys

1 x ON / OFF Key 11 x Volume Up 11 x Volume Down

Sensor

Automatic Brightness Sensor I Built-in Ambient Light Detection

Communications

FDD-LTE /TDD-LTE I WCDMA /TD-SCOMA / EVDO I GSM / CDMA Bluetooth 4.1 I WiFi: 802.11 b/g/n, 2.4 GHz, Support Hotspot

Cameras

0.3 Mega pixel Camera for 1 D & 2 D Code Scanning 5-Megapixel Fixed Focal Front Camera

Payment Module

PCI & EMV Certified Payment Acceptor with FuII NFC Contactless 4.3-inch color touchscreen

Battery

7.2 V I 2600mAh Rechargeable Li-ion Battery

Speaker

1 x Speaker

Location

GPS I GALILEO I GLONASS I BEi DOU

Printer

2-inch Thermal Printer Head I Print Speed: 80 mm/s Paper Width: 58 mm I Diameter: 50 mm

Host Peripheral Ports

1 x SIM Card Slot 12 x SIM Card Slot (optional) 11 x Audio Jack 1 x Micro SD Card Slot, Supports up to 128 GB 11 x Micro USB 2.0 1 x DC Jack 11 x Fingerprint Module (optional)

Base Peripheral Ports

1 x Cash Drawer RJl 1 (24 V) 11 x RS232 I l x USBType A, USB HOST2.0 Pogo Contacts for the Host Power Supply and Communication 1 x DC Power Supply Interface 11 x LAN

Indicators

Power Indicator I Smart Card Indicator

Adapter

Input: 100 - 240 V AC, S0Hz/ 60Hz I Output: 9V DC, 2.SA

Certifications

PCI PTS S.x I CE I FCC I IC I UL I RoHs I EMV L 1 & L2 I Visa PayWave MasterCard Contactless I MasterCard TQM I Amex Express Pay lnterac Flash L2 I Discover D-PAS I CSEC I APCA I ABECS


Product Description 

How to Power ON/OFF the Pax E600 terminal? 

Power ON: Press and hold the Power button for three seconds until the main screen displays normally. 

Power OFF : Press and hold the Power button for three seconds until the shutdown menu appears, tap Shutdown and then “shutting...” appears. The terminal will be turned off after a few seconds. 

How to Swipe a Magnetic Stripe Card ? 

Place the magnetic stripe face down (keep the magnetic stripe card perpendicular to the main display), swipe card through the magnetic card slot at a constant speed. 

How to Swipe an IC Card ? 

Place the IC chip face down, insert the IC card into the card slot, and push it to the end. 

How to Swipe a Contactless (NFC) Card ? 

Place the contactless card on the center of the payment module screen. 

How to Tear Print Paper ? 

Press the print paper downward along the cutter and tear it leftward or rightward when getting close to the main display. 

Pax E600 Charging Instructions 

  1. Insert the external adapter or the base to charge the device. 
  2. The Indicator lighting in red means the device is charging 
  3. Green indicates charging completed. 
  4. Indicator flashing red and green alternately means charging is abnormal. 

How to Replace a SIM Card? 

Open the battery cover on the bottom of the machine, remove the battery and follow the prompt to insert/take out the SIM card. 

How to Replace an SD Card? 

Open the battery cover on the bottom of the machine, remove the battery and follow the prompt to insert/take out the SD card. 

Articles in this section

Was this article helpful?
0 out of 0 found this helpful