Initial Setup



Weighing only 300g, the A60 offers all the advantages of the A-series payment terminals in a featherweight, elegant design. It is paperless, helping reduce your environmental footprint as well as stationery costs. Chose a version with the fingerprint reader if you need to process higher valued transactions. With the BP60A docking station, you can pair up to seven A60 terminals simultaneously for printing, charging, and additional peripherals connectivity.



  • Powered by Android 6.0
  • PCI 5 SRED
  • 5" HD Display
  • 5MP Rear 0.3MP Front Camera
  • Printer Base Option
  • 4G + WiFi + Bluetooth + GPS

Product Description

The following section points out the various functions and hardware features of the A60.




The following section provides basic operating instructions for the A60.

Power ON/OFF

  • Power ON: Press and hold the power button down for 3 to 5 seconds and then release.
  • Power OFF: Press and hold the power button down for 3 to 5 seconds and then release.

SAM/SD Card Installation

  1. Remove the back cover.
  2. Gently remove the battery from the device.
  3. Insert the card into the relevant card slot.
  4. Replace the battery and back cover.


Magnetic Stripe Card

Slide the card into the card reader with the magnetic strip oriented towards the body of the device. Make sure that the card is fully inserted into the card reader while swiping the card.

IC/Smart Card Reader

Insert the card fully into the reader with the metallic contacts facing up and towards the device. Make sure that the card is fully inserted into the card reader while scanning the card.

Contactless Card Reader

The contactless card reader reads cards and devices placed roughly within an inch (2.5 mm). For best results, place as close to the reader as possible and center the card over the indicated area at the top of the terminal.


  • Do not use an industrial-strength or abrasive cleaner as it may damage or scratch the screen.
  • Do not immerse the device in water or liquid.
  • Do not spray water or cleaner into EMV Card Reader or ports.
  • To clean the screen, apply distilled water or mild glass cleaner onto a soft, lint-free cloth and gently wipe the terminal.


  • Do not use or place the battery in direct sunlight and/or smokey, dusty environments.
  • Do not strike, squeeze, and/or tread on the battery.
  • Do not throw the battery in any liquids or place it in/near fires.
  • If the battery is deformed or damaged, please stop using it immediately and replace it.
  • If the continuous working time is only half of a new battery, the battery life may be at its end. Please replace it.
  • The specified battery model and charger must be used, otherwise, there may be an explosion.
  • The charging time cannot exceed 24 hours. If the battery is out of power, please recharge in an appropriate time and then disconnect the device.
  • Please recharge the battery at least once every 6 months to avoid shortening its life.
  • Replace the battery every two years.
  • Be sure to follow the instructions to dispose of wasted batteries.


• If any cables become damaged seek a replacement.
• Do not insert unknown materials into any port on the A60; this may cause serious damage.
• If repairs are required, please contact a professional technician instead of attempting them on your own.
• Avoid exposing the device to an excessively hot, dusty, or strong electromagnetic environment.
• Do not vibrate, shake, or drop the device.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Product Specifications


Paydroid Powered by Android 6.0


Cortex A7 + ARM 


8GB eMMC Flash + 1GB DDR RAM | Optional: 16GB eMMC Flash + 2GB DDR RAM Extended Micro SD card slot up to 128GB 


55" TFT WXGA 720 x 1280 Pixels Multi-Point Capacitive HD Touch Screen


3 Keys: Power ON/OFF | Volume+ | Volume


4G + WiFi (2.4GHz)+ Bluetooth 4.0


5MP Rear-Facing Optional: 0.3MP Front-Facing

Card Readers

Hybrid Chip & PIN + Magnetic Stripe | NFC Contactless


3350mAh | 3.6V


1 Buzzer | 1 Speaker


183.8 * 75 * 54.6 mm | 317g (Including Battery)




Optional charging base with fast printer and multiple ports

Peripheral Ports

1 Type C USB OTG | 1 Audio Jack


PS200 Pole Stand Fingerprint Reader (FBI Certified - Top Mounted) BP60A-BE: Automatic Receipt Cutter | Multi-Function Base: WiFi (2.4GHz) + Bluetooth 4.0 | 1 RS232 (RJ45) | 1 Ethernet (RJ45) | 2 Type A USB (Host)| 1 Type C USB (Device) | 1 Power Port (DC Jack) | 162 * 119 * 146.3 mm


-10°C ~ 50°C (14°F ~ 122°F) Operating Temperature -20°C ~ 70°C (-4°F ~ 158°F) Storage Temperature 5% ~ 95% Relative Humidity, Non-Condensing


Input: 100 - 240V AC, 50Hz / 60Hz | Output: 5.0V DC, 1.0A


PCI PTS 5.x SRED | EMV L1 & L2 | EMV Contactless L1 | Visa payWave | MasterCard Contactless | UPI qUICS | Amex ExpressPay | Discover D-PAS | JCB J/Speedy | Interac Flash | MasterCard TQM | CE | RoHs | FCC | Bancomat


Articles in this section

Was this article helpful?
0 out of 0 found this helpful